Operating voltage |
230V AC +/-10%, 50/60 Hz |
Relay contacts |
1 changeover contact,
2 normally open contacts,
potential-free |
Max. switching current |
2 normally open contacts = 12A AC1 at 230V
1 changeover contact = 10A AC1 at 230V |
Max. switching voltage |
250V AC - 50..60 Hz |
Display |
3-digit LED display, 13 mm |
Display range |
-99 .. 999 |
Switching status indicators |
3 mm LED |
Temperature resolution |
0,1°C |
Number of sensors |
1 |
Compatible sensors |
KTY 81-110
KTY 81-210
PT 100
PT 1000 |
Measuring range
- KTY 81-110
- KTY 81-210
- PT 100
- PT 1000 |
(depending on the sensor used)
-50° to +150°C
-50° to +150°C
-99° to +400°C
-99° to +400°C |
Sensor cable length |
2 metres or as required |
Control behaviour
|
2-point / PID control,
depending on setting |
Digital inputs |
2 (via optocoupler) |
Interface |
RS485 |
Housing
- Front dimensions
- Panel cut-out
- Mounting depth
|
68 x 106 mm
56 x 87 mm
47 mm
|
Protection class
- Front of housing
- Rear
|
The controller is open at the rear, as it is designed for installation in an enclosed housing.
IP 64
IP 00
|
Electrical safety |
Protection class II,
Overvoltage category III,
Pollution degree I |
Rated surge voltage |
1500V |
Connection |
Pluggable screw terminals
for cables up to 2.5 mm² |
Ambient temperature
- Operating temperature
- Storage temperature
- Max. humidity |
-10° to +50°C
-20° to +70°C
75% (no condensation)
|
Pollution degree |
Conductive contaminants must not enter the interior of the housing |
Subject to technical changes |
