Liter display LA-10 |
|
|
|
Liter display
(Front panel mounting, ultra-slim)
|
|
The litre display is used to show the volume of milk in milk cooling tanks. The volume data can be sourced from various sources:
- from a cooling tank control unit
(e.g. WTS300, LE300, GalaKool or AWE2)
- from the device itself – measured via a pressure sensor.
Values determined by the device itself are made available via the interface.
The SET button can be used to switch the display mode. After approx. 8 seconds, the device automatically switches back to the litre display. |
- Einfache Bedienung über drei Arbeitsebenen
- Schaltzustandsanzeigen über LED
-
|
|
| |
Connection |
|
| |
Connection examples for pressure sensors
|
|
| |
Technical data |
|
|
Betriebsspannung |
230V AC +/-10%, 50/60 Hz |
Relaiskontakte |
2 Schließer |
max. Schaltstrom |
je 12 A AC1 |
max. Schaltspannung |
250 V ~ |
Anzeige |
3-stelliges LED-Display, 13 mm |
Anzeigebereich |
-99 bis 999 |
Gehäuse
- Frontmaß
- Schalttafelausschnitt
- Einbautiefe
|
68 x 106 mm
56 x 87 mm
45 mm
|
Schutzart (Gehäusefront)
|
IP 65 |
Anschluss |
steckbare Klemmleisten |
Umgebungstemperatur
- Betriebstemperatur
- Lagertemperatur
- max. Feuchte |
0° bis +50°C
-20° bis +70°C
75% (keine Betauung)
|
* frei einstellbar |
|
|
| |
Optional |
|
|
A splash guard can be fitted as an optional extra to protect the controller electronics inside the control cabinet. |
